Ruchi Industries

Fly Ash Cement Bricks

We are reckoned Manufacturer & Supplier of Fly Ash Cement Bricks based in Jammu & Kashmir, India.  Use of these bricks results savings of almost 37% in the construction cost. The company has all the necessary arrangements required for furnishing divisive demands of the buyers. With our modern transit facilities, we can easily furnish urgent and quick demands of the buyers.

More about Fly Ash Cement Bricks : Fly ash is wastage of thermal power plant and steel plant, this waste is harmful to our environment. Fly ash cement brick plant use all this waste as raw material and now-a-days these bricks are mostly used for construction and gaining its popularity over builders and engineers because of its nice shape, appealing color, finish, quality, high strength, uniformity and less consumption of mortar plastering. Owing to the high concentration of calcium oxide in fly ash, the brick is described as "self-cementing". The manufacturing method saves energy, reduces mercury pollution, and costs 20% less than traditional clay brick manufacturing.


Specifications :

  • Thickness - 225mmx112mmx73mm ±3mm
  • Strength - M-10 mix, M-15 mix
  • Nos/sq.m - Each

Rate/sq.m : Rs 5.75.00, Rs 6.25.00.

Comparision of Clay Bricks and Fly ash Cement Bricks

Points of Difference Clay Bricks Fly ash Cement Bricks
Color Varying colour as per soil Uniform pleasing colour like cement
Shape and Finish Uneven shape as hand made Uniform in shape and smooth in finish
Weight Heavier in weight Lighter in weight
Moisture Absorption 5 to 20% 5 to 7%
Thermal Conductivity 1.25  – 1.35 W/m2oC 0.90-1.05W/m2o C
Dimensional Stability Dimensions can vary considerably in size, shape & texture. Fly ash bricks are true to one size and texture
About 2.9 Mpa About 10-15 Mpa
Compressive Strength 35-80 Kg/Cm2 80-150 Kg/Cm2
Painting Clay bricks in the early years often exude metallic salts which causes paint to peel off. Flyash bricks accept paint relatively well.
Water Treatment A lot of labour and water cost Involved Not Required
Handling loss 5% to 10% Breakage Negligible Say 0.02%
Quality Control Marginal
100 % Control
Render/Plastering 15mm to 20mm thickness Less than 10mm.
Bonding Lightly bonded Dense composition
Environment Friendly Emission of greenhouse gases during production. No pollution